Some of the parts may bend out of shape internally. If your recliner begins to tilt to one side when it moves back, there will be structural damage.
Try to make sure the wire won’t’ fall in the way of the mechanism again. You can fix the wire to the side using something as simple as hair ties. Try moving the wire out of the pathway of the mechanism. Once you’ve done this, you can secure the wires with electrical tape. You should find a portion of the chair cut clean in half. Once you have exposed the inside of the chair, trace from the hand control down into the mechanism. The recliner mechanism, when moving backwards, has a tendency to snip this wire in half.įlip your chair upside down and remove any coverings. If your hand controller isn’t making the chair move, the chair may have cut the wires. Much like the above issue, this comes down to the electrics. Flip your chair back the other way and you’ll have a fully working chair. Be sure the mains is off when you are doing the next step. Once you’ve done this, look for any wires that have come loose. Depending on your model, you may have to remove some screws holding down the bottom fabric. The headrest should be resting on the floor. To fix this problem, you’re going to have to reconnect any loose wires.įirst of all, flip your recliner upside down. Due to this, as your recliner is closing, wires can become snagged and come loose. There are a lot of moving parts to a recliner. This first section will look at some general problems that can occur in an electric recliner.
Unraid plugins fix common problems how to#
Has your recliner stopped working and you’re looking for a quick fix? In this article, I’ll outline some common issues with La-Z-Boy recliners and how to fix them.įrom problems with the hand control to problems with the footrest, I’ll break down the most common fixes. Even though La-Z-Boy is one of the most beloved brands in the recliner space, plenty can still go wrong.